! Test file for VOF test case
! 
! 4  grid points per dimension per domain
! 8  mpi processes

! The input file for running the PARIS code
! Parameters are read using a namelist statement.
! Blank lines and commented lines are ignored.
! Location of the parameters in the list is not important.

&PARAMETERS
                   
! name of the namelist
!=================================================================================================
! General parameters

TWOPHASE  = T         ! TwoPhase: Is the flow two-phase?
DoVOF 	  = T
DoFront   = F
GetPropertiesFromFront = F ! T: uses Front-Tracking data to compute mu, rho and Surface Tension. 
		           ! F: uses VOF data to compute mu and rho. 

ZeroReynolds = T
Implicit  = F     
hypre     = F      ! T: uses hyprepackage, F: uses SOR solver 
restart   = F       ! T: start the domain from a previous simulation
restartFront = F    ! T: start the frontfrom  a previous simulation
restartAverages = F
nBackup  = 200      ! number of time steps between  backups are kept.

NSTEP   = 100       ! maximum number of time steps
EndTime = 1000.0     ! When to stop simulation

MaxDt   = 1e-1     ! maximum size of time step
dtFlag  = 2        ! 1: fixed dt;  2: fixed CFL
dt      = 1e-2     ! dt in case of dtFlag=1
CFL     = 0.25
MAXERROR= 1d-6     ! Residual for Poisson solver
MAXERRORVOL = 1d-4
                   ! Numerical parameters

ITIME_SCHEME = 2
                   ! time scheme: 1:first order Euler, 2: second order quasi Crank-Nicolson

MAXIT    = 20
BETA     = 1.2
                    ! parameters for linear solver
U_init   = 1.d0
!=================================================================================================
! Output parameters

termout  = 1
ICOut    = T        ! output initial condition
NOUT     = 2        ! write the solution to file every nout time steps
output_format = 2   ! 1:tecplot 2:vtk
out_path = 'out'    ! name of the output directory

nstats   = 20       ! number of time steps between flow statistics calculations

!=================================================================================================
! Grid parameters

npx      = NPXTEMP
npy      = NPYTEMP
npz      = NPZTEMP
                   ! number of processors in x,y,z direction

Nx      = NXTEMP
Ny      = NYTEMP
Nz      = NZTEMP
Ng      = 2
                   ! grid size in x,y,z direction and number of ghost cells

XLENGTH = 1.0
YLENGTH = 1.0
ZLENGTH = 1.0
                   ! domain size in x,y,z direction

read_x   = F       ! read the grid file for x-grid; If true xLength and xform are neglected
read_y   = F
read_z   = F

x_file   = 'xh.dat'	! input file for xh (Nx+1 points)
y_file   = 'yh.dat'
z_file   = 'zh.dat'

xform    = 0.0		!1.0
yform    = 0.0		!1.0
zform    = 0.0       	! non-uniformity of the grid if not reading an input file
                     	! 0:uniform; +:clustered at center; -:clustered near ends

!=================================================================================================
! Flow parameters

GX      = 0.0
GY      = 0.0
GZ      = 0.0
                   ! Components of the gravity in x,y,z direction

BDRY_COND = 1    1    1   1   1  1
                   !Type of boundary condition in x,y,z direction: 0:wall  1:periodic  2:shear
                   !x- y- z- x+ y+ z+

dPdX      = 0.0
dPdY      = 0.0
dPdZ      = 0.0
                   ! Px, Py, Pz: pressure gradients in case of pressure driven channel flow
                   ! Px = (P(xLength)-P(0))/xLength

RHO1    = 1.0
MU1     = 0.0
                   ! rho1, mu1 : density and viscosity of the matrix phase

RHO2    = 1.0
MU2     = 0.0
                   ! rho2, mu2 : properties of the drop
SIGMA    = 0.0
NumBubble =  1
                   ! number of bubbles

xyzrad(1, 1)  = XCTEMP
xyzrad(2, 1)  = YCTEMP
xyzrad(3, 1)  = ZCTEMP
xyzrad(4, 1)  = RADIUSTEMP

                   ! Initial bubble size and location : x,y,z,radius

MaxPoint = 2000000
MaxElem  = 4000000
MaxFront = 100
amin     = 0.32
amax     = 0.96
aspmax   = 1.54

smooth   = T        !smooth the interface
nsmooth  = 10       !every nsmooth time steps
nregrid  = 10       !regrid the front every nregrid time steps

BUOYANCYCASE = 0
                   ! BuoyancyCase : determines what density will be subtracted from the gravity 
                   ! body force.
                   ! 0: rro=0,  1: rro=rho1,  2: rro=rho2,  3: rro=average(rho)
!=================================================================================================

/
! end of the namelist